Sprue goo... It's amazing, it's wonderful, it does all sorts of things! ...It also takes bloody well forever to dry. I want to start sanding, not check it every couple of hours, knowing I need to let it set overnight so I'm not sanding goop! Oh yeah, as is tradition, I made too much, oh well.

While a few more bits dry on the little Eevee (and sprue goo to fully melt together), I decided to break out the Big Eevee kit, to do a relaxing, just have fun build... Regular sized Eevee kit head for size comparison. #buildthestash #pokepla

Some messy and older WIP tankish bits and pieces…I often prefer WIP photos to finished ones…🤷‍♂️👍

Ratling Warpblaster 1/3 #warhammer #ageofsigmar #aos #skaven #warhammerfantasy #nerdlings #paintingwarhammer

I MADE A PHONE CALL TO MY DOCTOR'S OFFICE AND I WAS SOOOOOOOOOOO BRAVE ABOUT IT

A norn emissary that is inspired by pop rocks/the process of dropping them in soda. Kinda the light on the tail to dark on the upper body if that makes sense. Was anyone else not allowed to eat them both together as a kid? Just a few more details left to go #warhammer #nerdling #warhammer40k

Two angels from Rocket Pig Games I printed and painted. #fdmprinting #minipainting #dndminiatures

Delivering on some quick #palworld fanart! Apologies to Lifmunk fans. #pscart

GOUF IS DONE G O U F O U F #gunpla #gundam #modelkit #photo #photography #gouf #goufcustom #機動戦士ガンダム #ガンダム #プラモデル #figure #plamo

Here's the pose I'll probably be gluing the Eevee into. For regular builds this isn't necessary, but since I plan on removing all seams while maintaining the original colour of the plastic, it's necessary. Second pic is the posed Eevee kit with the two Quick Eevee kits. #pokepla #buildthestash

Further progress on the Eevee model! Most parts have been tacked together, and I'm waiting on the last few parts to fully dry and cure before testing what pose I want as his fixed pose, since I'm aiming to eliminate ~all~ visible seams on him. #pokepla #buildthestash

Painted Hobgoblin from Marvel United! #BoardGames #MiniaturePainting #MarvelUnited

Just finished my custom paint job on HG Dagger L! This little grunt unit was a fun project and I love the head design. The light colors give it a nice spring feel and pops very nicely 😊 #Gundam #gunpla #seed

This is probably the most complex build I've ever done. RFM is not to be trifled with, #histscalemodels. I haven't added a few of the more fiddly parts and the snow chain wheels due to their delicateness, but the Struker MGS is about ready for prime time.

Painted up the faces, and then blocked in the volumes on the reds for the third stand of Men-at-Arms #hobbystreak Nine Eight Seven

Intellijel has released their Jellymix, and oh my, do I want to get my paws on one when I can afford one, because I really do like that it's a nice, compact, five channel stereo TRS mixer, with two aux sends as well!

Yay! Found the box my MG Ginn and MG Strike Rouge were hiding in... Now if I could just find the box that the wings for the MG Wing Zero EW Ver.Ka were hiding so I could quite possibly start doing the waterslide decals on that kit...

HG 1/144 - MS-07B-3 Gouf Custom Straight build with panel lining and G-Rework decals. I'm not a monoeye fan typically, but I kind of fell in love with the Gouf while building it - especially that badass shield, gauntlet, Gatling gun and sword sheath combo. It's also quite tall. #Gundam #Gunpla

once upon a time i was drawing a helicopter. then i forgot the rotors on the helicopter. the end. #art #traditional #inkart

Evening all, a quick razor crest update. The engines are done and a bit of detail has been added here and there. Not sure what else I want to do to it other than guns at the front and glass for the cockpit. Happy modelling all

What everyone’s favourite grunt suit? I’m partial to the GM Sniper II. I think the II is for many seconds he lasted on screen before being exploded 🥲 #gunpla #gundam

Last build of 2025! Didn’t get a chance to take better pics though 😅 #eevee #pokepla #pokemon #og151

Okay, #histscalemodels. Here is where we sit with the RFM Stryker MGS. Still so much to do but we are getting close. Tons of cool details in this kit, and yes, those are working hinges. 😮‍💨

I've mentioned this project a few times, but haven't actually posted about it on here yet - The Midnight Raid. It's based around a simple question: What if gnolls got their hands on a tank, and maybe a few other things? What kind of joyride would they go on?

This was a ‘big build’ from a while ago…lots of mistakes in it too but it’s one of my favourite efforts at any sort of tank…I think it‘s reasonably accurate if not perfectly curated…🤷‍♂️🫣

HG シャア専用ザクII 赤い彗星Ver.完成✨️ 今回、トップコートを本体は艶消しで 武装は半光沢にしてみた！

Resuming work on this Demi Barding. Custom scheme inspired by a mech from another franchise, can you guess? Started this a long time ago, hopefully will finish this time. しばらく止まっていたデミバーディングの制作を再開。他作品のメカをイメージしたカスタムカラーですが、分かりますか？今回こそ完成させたいです。 #ScaleModel #gunpla #ガンプラ #Mecha #Plamo

Figured I'd post about something a little different today. Here's the custom MG Zaku II I've been working on on and off for the past little while. Combined the Yujiao Land Zaku II resin conversion kit with a few ideas from the MS-05L Sniper Zaku and the MS-04 Bugu. #gunpla #buildthestash

Haven't forgotten about Taurus, but I've been dealing with a decent amount of burnout and feeling overwhelmed in general. There's been an annoyingly large (and taxing) amount of phone calls, appointments, emails, and waiting for replies the past few weeks.

And they say Mantic models are rubbish. (They're not) #mymantic #kingsofwar #Xirkaali #nerdlings

Been wanting to build something other than tabletop wargaming units, so let's bring a kit out I've wanted to build for a while! They're fun little kits, I like Eevees, they're super handy kits for trying out various techniques on, and a box out is a box out! Plus it's an Eevee. #buildthestash

Got my first stand of W'adrhun Blooded built, which leaves just eight Blooded to go to finish off that release date One Player Starter Set I've had in the backlog for some time!

More interior work on the Academy M113. Vallejo filters followed by Vallejo and AK pigments. Next up I’m going to seal the horizontal surfaces with some dilute matte medium, followed by a blow down and flat coat on the vertical surfaces. #scalemodels #histscalemodels #buildthestash

グリレゼクスHの新装備

Painted up my Infinity's Lament today. Did a little bit of a mod to it.

The first model from my new obsession - Infinity - is done! #miniaturepainting #infinitythegame #jsa #shindenbutai

2k points ready to go #yoroni #Conquest #colorsofconquest #MiniaturePainting

Whoo, almost got all of my terrain not only out of their packed boxes from the move, but also sorted into a few Really Useful Boxes. I really need to get some more from Global Evil Corp so I can make a full fledged 2-3 tier table for Infinity. Yeah, I'll have to paint it too, but it would be epic!

This is a mini from the #Humblewood box set, a Vulpin, reminds me of a fairytale also fantastic Mr fox in some ways 💕 #DnD #DungeonsAndDragons #MiniPainting #MiniaturePainting #Art #artsky

The key to a foxes' heart! I have included one with a blank card for if you'd like to use it for your own Valentine's Day message! Please consider showing support to WebCanids on Patreon at www.patreon.com/c/we... #art #furryart #webcomics

Did the fronts of the shields tonight - going to try and get to the faces and leathers tomorrow #hobbystreak 980

Some more Lumineth from the current army project, in celebration of the battletome coming out: #aos #warhammercommunity #lumineth #minipainting

Thanks!! Here's the whole army so far:

Just noticed the Troggs aren't fully done in the Gitz picture, here's the evidence they got finished up in time for the event:

Just about done! #lumineth #aos #warhammercommunity #minipainting

Sometimes it's the simple things in life that give great joy. Got the Ikea Lack shelves put up over the painting desk. Needed several breaks (and help) to pull it all off, but both are finally up. Now to just find the various pieces for some of my kits, and of course, get displays sorted out.

Calling the AirFix 1,35 Ferret MK1 finished, a really nice kit to build, enjoyed this one. A big thanks to @jim09ea63.bsky.social for his feedback on the communication antennas.pleased with how it has turned out. #HistScaleModels #ScaleModels #Airfix

I am not fully convinced yet if I actually going to use it. But I guess I now own a tiny duck with gasmask 😂

More of my admech sons I've finished recently :3 this one was my third mini painted but I like him quite a lot #warhammer40k