Band saw made quick work of this odd cut, I have another 60 degree to make in some different square tube and then it's to welding.

Printed an openflexure microscope and got it working. These are from the cheep setup. I haven't added the proper optic which will double the magnification. That's the scope, penicillin, lymph, and a grasshopper antannae. Should have the higher magnification setup by next Monday

It's #makeShitMondayI want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes I made a bunch of cookies, and also scribed out some metal square tube stock for a project, but no actual cuts yet. Soon! Show me what you got!

Had a issue where I went to out of town, my internet had gone out. So decided to resurrect an old failed APC AP9217 MasterSwitch PDU. Ripped out the dead electronics and replaced with a relay module and a pi zero with an ethernet addon board. And with some Python code it can power cycle the modem.

It's #makeShitMondayI want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes I've mostly made bad food decisions, but a bit of electrical work and I managed to break a chair. Happy New Year! Show me what you got!

Lets build this thing

I’m so excited! I got some Kodak Charmeras! The Labubu of cameras! They come “blind box,” and there are 7 different styles. I now have three of the 7, with a few dupes to share with friends.

Started redoing the power setup to my badge wall. More USB power supplies. Modified them to be wall mountable. Shorter cable runs, so cleaner and easier to power things. Many badges require writing custom firmware so they power on in a blinky mode state, so it's still slow going. #makeShitMonday

It's #makeShitMonday I want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes Going through weight stand design iterations. Initial idea, second was structural and stylistic, and 3rd was for materials. Show me what you got!

It's #makeShitMonday! I want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes I made these chard and gruyere pastries for Thanksgiving. Show me what you got!

There's something about setting dimensions on something you're going to make that makes it feel real.

Making stuff.

3rd iteration of the weight tree, close to final design. I updated the main supports to be at a 30 degree angle and that allows for the overall height to be a couple inches shorter making the dumbbell placement better. I made the weights transparent for easier structural viewing

It's #makeShitMonday! I want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes I put a work table on a belt grinder. Show me what you got!

Cutting of that plate was to get a work rest onto the belt grinder, this should make it way more functional.

Band saw vs plasma cut.

It's #makeShitMonday! I want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes I picked up a new welder and to get it dialed in I made a d12 out of metal. Show me what you got!

New welder, who dis?

Up to some shit again

Was gifted a piece of giant concha. It's pan dulce! What to do with a giant concha? Make french toast with it! This is seriously my new favorite thing

It's #makeShitMonday! I want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes Lots of Halloween work! And I made peppermint ice cream. Let's see your costumes! Show me what you got!

Set for tomorrow. Also have alternative candy, non-candy options, and treats for pups.

Printed in clear blue and painted during a meeting. It's for my kid's Halloween costume. I put an LED in the base and a coin cell battery recess in the back so it lights up and glows. Bit of a rush job, but that's showbiz baby.

It's #makeShitMonday! I want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes I worked on my Halloween costume and got a good hike in. Show me what you got!

We are so back! Halloween crunch time gooooooo

It's #makeShitMonday! I want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes Whole lot going on! Making a lot of AI slop but also working on Halloween stuff! No pictures but am so ready! Show me what you got!

It's #makeShitMonday! I want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes Fixed a faucet cartridge and messed with some ai junk. Show me what you got!

Messing with sora guardrails, Alan Rickman is allowed it seems.

It's #makeShitMonday! I want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes I've been working on a Halloween prop I built around an esp32. I'm still trying to refine the timing but it's mostly done. Show me what you got!

If you're in San Diego and want to hang out with some nerds the next Taco Con is on the 7th, next week!

Made this for your upcoming awareness trainings

Finished the esp32 prop for the office. There will be a few more but this is the main one. It has a bunch of lines and different actions but this is basically the jist of it.

There are some really awesome bars here, check it out!

Made a few more minor tweaks but I think this updated version will go up on Printables soon. I have the latest version on the print bed right now, just need to resolder some wires I broke after so many test fits.

#ThrowbackThursday from #defcon33, here's a panel discussion of the history, significance and legacy of the mighty @phrack.org. Enjoy, and pass it on. youtu.be/TW-D1I27E08 #defcon #phrack #phrackzine

I've been incorporating this into my designs lately. This is a captive recess for the hex side of an SMA connector. Getting a wrench into a tight space like this is fiddly and it also keeps the piece exactly where it needs to be. Less likely to work itself loose too...and it looks cool!

It's #makeShitMonday! I want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes I made progress on a halloween prop and am in the process of reworking the @TheMeshtastic llama case for needed updates. Show me what you got!

Reworked the case for some quality of life stuff, improved space for larger battery, and the screw positions are much more logical. Doing a test print and will see how it goes together.

#DEFCON33 update: Contest Winners are live on the DEF CON website! Check out the results on defcon.org/html/defcon-... We want to extend our gratitude to everyone who took part in contests this year and big congratulations to the victors. #defcon #contests

Updating the @TheMeshtastic llama case so all the components are on one side and expanding the cover to fit a larger battery. Should be an overall better design without changing the aesthetics too much.

#defcon, where the future of #hattery is now. #ThrowbackThursday #defcon33 #hardhatsofdefcon #tacohat

It's #makeShitMonday! I want to see your projects for the last week, cooking, hacking, crafting, coding, wood work, anything goes I made a lot of progress on the Halloween prop and have a functional prototype. Just needs some fine tuning. Show me what you got!

Rough Halloween prototype complete. This triggers off Bluetooth or an infrared beam when someone walks by. I need to build an enclosure for the motor to deaden the sound. It's programmed to cycle through a bunch of different sounds and opening configs too!

Cleaning up the wiring for the current project. Nice and tidy!

Part fits perfectly on the first draft.

More CAD mayhem, this time for Halloween stuff. Should have a rough prototype by the end of the weekend it looks like.

Celebrating 10 years an @eff.org member today.