I managed to order the big community goal that I had up on Throne, thanks to my lovely Twitch peeps. I was not surprised that it was magically in stock after the price increase, but there we go. One mastodon on the way - if you have contributed to it, thank you so much ! twitch.tv/gloriousbadger

The second chunk of the commission was this squad of Iron Warriors chaos space marines! A good chunk was painted on my Twitch stream. Another very enjoyable set of minis to paint! twitch.tv/gloriousbadger #warhammer #warhammercommunity #chaosspacemarines #nerdlings #wh40k #wargaming #miniatures

I recently finished this commission of a squad of Iron Warriors terminators. As always, double lightning claw bloke is my favourite. A good chunk was painted on my Twitch stream. twitch.tv/gloriousbadger #warhammer #warhammercommunity #chaosspacemarines #nerdlings #wh40k #wargaming #miniatures

If you raided in on my Twitch stream last night from @peachytips.bsky.social, thank you so much! If you coudn't quite make out what was being printed on the @bambulabglobal.bsky.social X1C - we now have a full attic for The Black Swan! Rooves are now being printed too! #3dprinted #terrain #dnd

Here are the Horus Heresy World Eaters that I painted up over the past few months when not streaming. I didn't quite get the Kratos done - but it's still on the agenda! #WarhammerCommunity #3dprinted

I used to do a lot of baking for another Instagram I had, and on this Star Wars Day, I shall bring back my Qui-Gon Ginger cake! Or at least a pic of it. It was quite fiery and sweet, but it had enough lemon cutting through it to make it quite delicious! #MayThe4th #baking

I was rummaging in some yet to be fully explored boxes in the garage, and found this old Ghost in the Shell garage kit that I purchased back in 2001? when I was living in the States! I will be attempting to strip and repaint the other Kusanagi kit I have at some point, to join this one.

I'm almost finished posting pics of this World Eaters despoiler squad, I promise! However, it was a really enjoyable paint! #horusheresy #warhammer #3dprinted #warhammercommunity

My favourite miniature from the recent Horus Heresy World Eaters squad that I painted up! I'm still trying to improve the blood painting, as it's something that I've never been keen on. So I am using this small army as an excuse to improve! #warhammercommunity #warhammer #tabletopgames

Any thoughts on what legion rhino should be underneath the Horus Heresy World Eaters contemptor dreadnought?! #paintingwarhammer #WarhammerCommunity #wip

Another saucy print. He will probably end up being for my Imperial Fists, but at this rate... who knows? Printed with one of my @elegoo.bsky.social Saturn 4 Ultras, using their ABS-like 8k 3.0 Red Clay. #3dprinted #horusheresy

Spider-dread contemptor for my World Eaters army that I am working on! I'm only planning on a couple of dreads for my Horus Heresy army... I guess slightly more long ranged for the next one! #3dprinted

#ad Woooo! So happy to be able to share my take on the new Lhykhis, Phoenix Lord of the Warp Spiders! Big thank you to @warhammerofficial for sending me the model and including it in their community article. #warhammercommunity #adwip #aeldari

It was a foggy old day today here in England! So I spent most of the day virtually working out the weights of 3d models that I sell 😆 There are so many more to go 😆

I am calling these chaps done for now. I think they are alright for tabletop. I just wish I could find that box of skulls! I'm not entirely keen on blood effects, but hopefully this World Eaters project might help! #horusheresy #3dprinted #worldeaters #warhammer30k #warhammer #warhammer40k

Chop chop! Not entirely sure how I feel about these, but they are almost done. A Despoiler unit for some Horus Heresy World Eaters! #wip #warhammer #warhammer30k

A nice quick plate of #3dprinted helmets, shoulder pads and pistols on the ol' @elegoo.bsky.social Saturn 4 Ultra! The other two printers are cracking on with a bunch of space marines for some upcoming painting projects! #3dprinting

Three successful plates full of 3d printed goodness using the great @SirayaTech Fast Navy Grey on an @elegoo.bsky.social Saturn 3 Ultra an a pair of Saturn 4 Ultras!. Keep an eye out for some upcoming painted goodness! #3dprinting #miniatures #3dprinted

What have we been up to today folks? I cleaned up some 3d prints and recorded some sort of YouTube video 😆 I also managed to get a bit of a sunset photo action when I remember to get out of the studio for a bit !

The fleshy GUO has been refound - not quite sure where the heads and hands are - but I have decided that I will be demagnetising it. Hopefully I can blend in the joins without needing to strip it and restart!! #warhammer #nurgle #WarhammerCommunity #wip #paintingminiatures

Still feeling nurgly ! 👀😞😒 Happy Sunday! #warhammer #warhammercommunity #miniatures #paintingwarhammer

IS THIS THE BOX FULL OF STUFF?? I found Kill Team Rogue Trader folks!! What other goodies are in here?? Let's find out!! #killteam #warhammer40k

It seems like a good time to start posting here more. I've been working on this Dark Reaper, with the intention of doing a whole squad. The face has been smoothed over and then the skull freehanded on.

Mission 3 - Back From Darkness Ready to host the final instalment of the Ultramarines Duty & Honour Campaign this evening. With the SpaceHulk disintegrating around them, the Ultramarines must fight their way to the Thunderhawk extraction point… #WarhammerCommunity #SpaceHulk

I printed a few @GreyTideStudio Crimson Lords parts over the past week ready for a Blood Angels project that I want to work on for Warhammer 40k. Lots more to print though to make things snazzy! Printers: @elegoo.bsky.social Saturn 4 Ultra Resin: @SirayaTech Fast Navy Grey

A majestic full plate of bits from Greytide Studio on the @elegoo.bsky.social Saturn 4 Ultra using Siraya Tech Fast Navy Grey. I did unfortunately forget to print out one extra bit, so I'll be spinning up the other printer soon! #3dprinting #3dprint #tabletopminiatures

Yesss my computer is overflowing with stuff. It's a disaster area. Send help. Thanks.

It's a foggy morning here, so I have retreated to the studio with a hot drink and a few ideas to work on, along with some 3d printing and hopefully some painting! What are you doing today? What's on the agenda?! #paintingwarhammer #3dprinting #miniaturepainting #fog

If you see this, you must post a vampire. I don't currently have many, but this is my Lemartes conversion I did for a potential Blood Angels army! I don't do conversions much, but I have some planned for Warhammer 40k next year!

The biggest army I've ever painted. I'm not even sure how many points this comes out to! 😍 Was an amazing project that took much of the year to complete but immediately satisfying. #WarhammerCommunity #PaintSlam24 #warhammer #oldhammer #TheOldWorld #whfb

Yes, good.

WIP Death Company Dreadnought.

I finally got around to cracking open the BambuLabs X1 Carbon printer! It's going to take a moment to get printing with it, but I'm really looking forward to putting it through it's paces! #3dprinting #3dprint

That's a Blood Angels combat patrol ordered - the question is, how the devil are we going to paint them up? I think it might the time to "attempt" the Heavy Metal style. What do you think the "best" red base is for a Warhammer 40k Blood Angel??

gloriousminiatures.com/3d-printing-... I do waffle on a bit, but here is a short break down of setting up the little print area beneath the painting studio! We are off to a good start finally! #3dprinting

I really enjoyed painting this commission of this Salamanders techmarine. I'm looking forward to being able to paint again in a couple more months! Who else is keen on the Salamanders?? #WarhammerCommunity #warhammer #warhammer40k

Jesus Amazon are selling "Death Guard Green" as a beauty product.

I painted up Tor Garadon for my Imperial Fists what seems like ages ago now! I'm really looking forward to getting back to painting again in the next few months. #WarhammerCommunity #warhammer40k #warhammer #spacemarines

To start off #MarchforMacragge, I give you #WarhammerCommunity a video I did last year 😆 Hopefully in the next two months I can return to painting and stop reposting old stuff! youtu.be/zw9sxhXv1G4

I saw this Warhammer 40k battleforce out in the wild today! Can I hold off from buying 🤔

This beast of Nurgle was such a fun mini to paint! I need to try and get around to painting another sometime! Have you painted one up? How did you paint yours??

Before I moved house, I was running a somewhat succesful 3d printing business. I'm firing that up again soon! This was one of the heads I printed and painted! Who likes a bit of 3d printing?? I'm looking to get some new printers ordered soon!

The last video in the little Horus Heresy series is here, along with a the final image of the Alpha Legion space marine that I painted up! I was pretty happy with the final effect we got with the armour! What do you think? youtu.be/QOSaKGcyAZk

Almost wrapping up the Space Marine legions for the Horus Heresy is the Raven Guard. A chance to try out some different black armour! Do you have a preferred method for black armour??! The video is below! youtu.be/IIyB_Jz-xqY

Here is the video for my Horus Heresy Salamanders space marine painting! Saying that, you could definitely use it for Warhammer 40k too. I don't believe their armour colour scheme changed drastically across the age, barring any weird units?! Let me know! youtu.be/MYScbJxc9vg

Gosh, I hope I can get back to painting soon!! New orcs and goblins battalion set has been revealed!

Gosh, I did struggle with the original red paint on this Word Bearers space marine for the Horus Heresy! We cracked it in the end! You can check out the video here: youtu.be/yFBr0oFyUrg