ORCHIS FRAME IS RELEASED! Designed for Lancer RPG. Models are test printed at 50 mm. tall size and is provided with pre-supported versions. - Print out the non-supported models at 150 mm. for roughly 50 mm. tall model Get your STL HERE! mmf.io/o/498788

T99 BCV miniature STL file is available on Myminifactory www.myminifactory.com/object/3d-pr...

Looking good from the angles that matters most. #lancerrpg #tabletopgames #miniature #3dprinting

Filling the shelf. None of these stuff are bought. A result of my overly active imagination

I am having a dilemma. I am runing out of my electronic parts to build robots. I want to build a lot more but it seems that I have to cannibalize the old to buid the new I guess I can put the older parts in a project box or something...

Volume study

Some space fighter designs

Fuchikoma chassis is finished

The chasis is widened considerably to make room for the spider tank's face and arms. The exibition may be over but my development continues.

Ad hoc guard rail is added to protect the PCB board. It is unlikely that a robot with this kind of COG will tip over but better be safe than sorry. Afterall, visitor of all kinds will be driving it.

Putting a ghost in a shell

I am at a temporary impasse. I have done all I could in my head. Either this thing will have enough traction to move a 1kg robot or it won't. It wouldn't be the first time I made a robot that won't even skid on a flat ground. The only thing left now is to print out and test.

Over the course of desiging parts for my robots I discovered the limit of how small I can make a gear teeth and #3Dprinted it out with repeatable result. And here's the limit. If you are using a FDM printer it won't get smaller than this (unit is in mm.)

Tachikoma (project name) spherical wheel dimensions are dialed in. No gear slip so far. Traction is questionable but that's to be expected from ABS plastic. TPU material could improve it but I will cross that bridge when I get there.

Pointy boi comission

Here's one of my idea that I haven't got around to develop further. Alternate WW2 / Dieselpunk mech suit. So far only 1 design was made then I completely forgot about it. Not sure if people would want something like this.

Here's wild idea I got lying on my bed: 1) Acquire a cheap RC tank 2) Harvest the electronics 3) Put it in my custom chassis A micro controller is overkill for something so simple as driving 2 DC motors. Cheap electronics from a donor toy will be good enough and it comes with a remote control

Maybe unpopular opinion but I believe any job that can be done at home should be allowed to be done at home. Office transit burns massive fuel, building aircon is energy intensive. People could spend more time on leisure or self improvement and spend more money on goods, driving the economy.

Gong Xi Fa Cai I am obligated to repost this every Chinese NY

Are you bored with my grunt mech miniature yet? #3Dprinting #tabletopgaming

Vishwakarma kinetic sculture. The gears behind the God of Craftmanship is motorized. If you told my 18 yr. old self that one day I will be scultpting a God I'd have laughed. I was just rejected by the University of Fine Arts then, on the ground that my drawing sucked.

1 comission done Subdiv galore, this one.

First draft of Vishvakarma kinetic statue

Very steampunk. I am waiting for a silent clock gearbox to arrive so I can hook it up to a motor.

Replaced all the joints with FDM printed plastic parts. Unfortunately, doing everything with resin is not feasible but at least I can crank out one in 18 hour instead of 48. . It also use only 1 kind of bolt for everything, making the build much more streamlined.

Following the success of the Cataphract robot I will be giving away the STL file for it's caterpillar drive for free. The unit uses a ubiquitous motorized gearbox and the track is print in place. It is good for small robot projects with very little cost. buymeacoffee.com/rattapoomk/e...

มีฤทธิ์เดชเวทย์มนต์ร่ายก่นเสก ทหารเอกองค์รามาพระทรงศรี ขยายร่างใหญ่โตพันทวี อาวุธดีตรีเพชรประจำกาย . บุตรพระพายกับนางสวาหะ ชีวิตเป็นอมตะไม่สูญสลาย หากถึงฆาตหมดสิ้นชีวิตวาย ลมผ่านกายกลับฟื้นคืนวิญญาณ์

When I was recently unemployed, a friend offered me a job to do a jewelry prototype for her. I told her I don't know if I could, sculpting organic stuff is not my expertise. . "I know you could do it", that's what she said. . I came a long way since then

1 day print time for the main Cataphract shell. Well at least I don't have to print a lot of parts. I will cut this piece up to smaller parts but I doubt I will save that mch time.

Standing up using micro servos alone isn't reliable enough so I wrote a code to have the caterpillar drive to assist it the motion. That means it will need some extra code to isolate the transformation from movement. Next time I should use a worm gear but this is good enough.

Entering the realm of the Gods

Mmmmmm. First layer porn. Very hot 🥵 (240c hot end on 90c bed)

This comission took a lot out of me with the complex curves but I think I pulled it off

Space auto pew pew

Something for this Jan 31 vocational school faire

Patching up other people's model is tiresome, especially when he used a totally different workflow. They guy obviously used Zbrush for this. I am just a dude with Blender.

11 cm. tall action figure is done. Not quite up to my expectation but I'd give it 7/10 All parts are printed from a resin printer and uns only M2 x10 bolts . Joints are... functional but I will see if I can improve the quality. An improvement over version 7 in some ways.

Wanted to finish this prototype before 2025 but alas, I ran out of resin. Oh well... one do what one can

Starting 2015 with things I want to do this year. Probably action fugure or miniature.

Gave all of my Ferrous:Steel bridge resin test print models to my neice so she can have her doll city. I aim to be the best weird uncle around.

The digital edition has had many hurdles; that being said, I may have broken a personal record with how fast I was able to push it out and organize a team that includes @lewisrk.bsky.social and some old as well as new friends; the battle continues #gamedev #indiedev #mecha #ttrpg

FERROUS : STEEL BRIDGE 5 physical box sets will be on sale at Saphan Lek Night Market (27-29 DEC) for 2500 B. Each box contains a play mat, 8 unpainted resin models, papercraft terrains and everything you will need to play out of the box. #Tabletopgame #miniatures

Letting you guys know that I have been taking comissions and will not be able to design a new miniature for a month or so.

Opaque water colour brush practice A dream game of mine. A newtonian physic based space mech combat game. Like, space battle from The Expanse but with mechs

Would you look at that... 11 cm. tall action figure. You guys will need M2 nuts and bolts though. Not very common but also not impossible to find.

F around Sunday because I was busy on Saturday. I give you the front left leg of my spider tank. The degree of movement is totally overkill but I don't want to be efficient here.

Yoooo South Korea just went Patlabor: The Movie

Panel lines can be quite a test of patience and concentration. I need to work on better pipeline. I have been busy this month with lots of comission but I have gained quite a bit of good ideas and new skills. Let's see if I can do something cool this month.

Saturday is my F around day. I set this time aside to do things that may or may not work. I am experimenting on a balljoint based on M2 nuts and bolts instead of the usual M3. I hope this will lead to smaller #3Dprint action figure in the future.

Eh he he he he he he he