Something I've been toying with doing is adding a subway tube to my sewer city display. So when @funbiestudios.bsky.social made a portal add on for the haslab road I had to get them. Here is module 1 of 4 3d printed. Like the idea of the ground bridge. #transformers #toyphotography #deskbot

Roughly blocking out the rest of his body before figuring out how to get some semblance of transformation in there 🤔

The shape of things to come as we cross over into 2026... Happy New Year one and all! 🥳

Here's part two of Transformers Animated Crew Console, completing the sides with a bunch more buttons, monitors and a large scanner! This should really give a nice diorama setting for any of your Animated bots! #3dprint files now up at www.patreon.com/posts/146906076!

Here's slightly smaller modified Swerve's bar for your Lost Light bots to grab a drink and chill! Available via Collector Crafts on FB! 😉

Couldn't help but design a hidden storage compartment for the radar scanner thingy in the left corner of the console which lifts up using magnets! 😁

Here's a rendered sneak peek as we get a-printing with the rest of the side bits for the Animated Crew Console 😁

Continuing with the side bits for the Animated Crew Console. With any luck we can get it ready before the year is out 🤞

With our new Age of the Primes Big Convoy having arrived, it's time to tweak the earlier Matrix Buster to fit his new iteration! #3dprint files now up at www.patreon.com/posts/146505714!

And this should be the final tweaked Matrix Buster for AotP Big Convoy; time to bring it all to life! 😉

Started to adapt the Matrix Buster for the new AotP Big Convoy and got a little stumped on the draft angle added to these waist pegs. So had try a different approach! 😅

Hey, I need a Matrix Buster too! 😅

Almost Christmas, so it's time to break out the traditional Missile Toad to really get into the festive mood 😁

With the toy collection growing and displaying of it being a constant thing, here's some foldable display risers which might come in handy! #3dprint files now up at www.patreon.com/posts/146196210!

Figured out that a bracing system would help prevent display stand from folding back upon itself 😄

Prototyping some foldable risers which take less space when stored... Some teething issues to take care of first😉

In case you've misplaced WFC Siege Sixgun's main black blaster - here's a quick replacement, complete with a 3mm front peg and 5mm back port for blast effects! #3dprint files now up at www.patreon.com/posts/145766113!

After detailing, here's Sixgun's blaster! A replacement in case you've lost the original as they seem to not fit in his hand very well 😁

Up next - a replacement piece for Sixgun 😁

Awesomely printed out axalon interior by damnyouwillis (on threads) Thanks for sharing these shots! 📸

To really complete the look for our earlier Animated Crew Seat, here's the crew console too (starting with the middle part)! Stay tuned as we'll have the wrap-around sides shortly. #3dprint files now up at www.patreon.com/posts/145580860!

To really complete the look for our earlier Animated Crew Seat, here's the crew console too (starting with the middle part)! Stay tuned as we'll have the wrap-around sides shortly. #3dprint files now up at www.patreon.com/posts/145580860!

Finalized a few more details for the central bit of the Animated crew console and also started working outwards on the sides. 😁 This might take a while .... 😅

Fit testing out the moving bits for the Animated console's control yoke ⚙️

Moving on to the tricky bit of designing the fight control yoke, where we're trying to make it accommodate the hands of various bots! 🤔

Going a little larger with the next set - a crew console from Animated! 😁

Love seeing awesome CyberBase setups in the wild! 😊

Here's a slightly modified stand to help hold up the Skyboom Shield along vertically alongside Star Saber and the Requiem Blaster! #3dprint files now up for free at www.patreon.com/posts/145122025!

Working on a quick tweak on the earlier Star Saber stand to fit and hold Skyboom Shield upright if you happen to have that handy 😉

Hailing from the the last episode in the three-part pilot - here's Mirage's parachute! This comes with a hanger piece, allowing you to suspend it in your display shelves too. #3dprint files now up at www.patreon.com/posts/144871197!

Added in the finishing details and it's time for a test print for Mirage's parachute 😁

Kind of weird that we've never came around to doing Mirage's parachute from the pilot episodes; so here we go! 😄

For more dynamic drill hands for SS86 Devastator, here's a motorized version of it! This kit will require a DC motor with gear attached for each drill, along with wires and power source. #3dprint files now up at www.patreon.com/posts/144577604!

Many tweaks later, this should be the final motorized Devastator drill! Gonna print and assemble another one so we have a pair of them for Devy and we should be good to get this released in a bit!

Turns out we should have supported the motor better for stability and better spiny-ness! 😅

And from the display shelf of Piotr Rybicki, here's a nifty Cyberbase setup with custom supports and ceiling bits he made to tie the whole look together. Teletraan-1 and med bed in there too! 🔥 Thanks for sharing this awesome shot, Piotr! 📷

Here's an homage to the Transformers Devastation game, in the form of a pair of drill hands for the recent SS86 Devastator! #3dprint files now up for free at www.patreon.com/posts/144274850!

Up next - a pair of mega drill bits for our jolly green giant!

And here's Micronus Prime's display stand, with a little mini version when he is out of his exo-suit too! When suited up, the standard pedestal base fits him nicely, again with his logo raised overhead. #3dprint files now up at www.patreon.com/posts/144063520!

As we prepare the display pedestal for Micronus Prime, thought it would be fun to also have a fittingly micro version for him alone! 🙃

Finally, here's the Animated Nemesis joining our Iconic Ships series! It's been painted with its distinctive grey jagged strips, and also sports a rearward 5mm port where effect parts can be added for dynamism! #3dprint files now up at www.patreon.com/posts/143835729!

Finally, here's the Animated Nemesis joining our Iconic Ships series! It's been painted with its distinctive grey jagged strips, and also sports a rearward 5mm port where effect parts can be added for dynamism! #3dprint files now up at www.patreon.com/posts/143835729!

Managed to get further along with detailing and also how the pieces can be separated for 3d printing. Time to run the test prints to try out the theory now 🤞

Getting further along with the Animated Nemesis. But it having parts sticking out in all directions is going to take some planning to make it 3d print friendly! 😅

Getting started on the next ship for the Iconic Ship series ...

Really enjoyed Windcharger's fun transformation, though unfortunately, the tradeoff for it is his hollow legs in bot mode. So here's a removeable gap filler to help give him more solid looking legs for him! #3dprint files now up at www.patreon.com/posts/143480780!

After one too many rounds of tweaking the general shape of the filler piece, we've nailed that down and can now get to the fun bit of detailing!

Getting started next on a piece to help fill some gaps on Windcharger's bot mode 🙂

With Star Saber here, it felt like it could do with a nice display stand to hold it up! So here we have two variant stands to do just that - one with a minicon logo base, and another with a more subtle, smaller footprint base. #3dprint files now up at www.patreon.com/posts/143165041!

Along the way, decided to also do a stand with the minicon logo - so now there are two options to choose from! 😁