So here we have my 3 primary designs showing what's plastic and what's resin. Hades, Mk4, Lancer. Was kinda fun playing dress up with the model and a lot of blue tack! #heresy #terminator #3dprinting

He needs to stop hitting this hard, I do not like being confronted with my reality... 😆

A mix of my parts, plastic, and other's designs. Wanted to show off the vanagarian torso's on my different kits, as well as a full display of the lancer kit on full display. I think next I'm going to do a couple of examples where you can see the specific plastic vs resin parts.

Okay so I might have had a few more bits than I thought saved up. Now all this is up on cults so I hope some of y'all enjoy them cause I'm not done making stuff like this. Shoulders and heads in the last pic are from Cornivius. #heresy #bloody #3dprinting

Hades pattern upgrade kit has been printed and looks great on a rig. Now also up and ready on cults I'm so happy with the new shoulders which make the look so much better than earlier pictures. #heresy #terminator #3dprinting

So I finally got the bloody lancer upgrade kit to load on Cults3d (turns out the term "Butt plate" was forcing review) I'm going to try to get the weapons and equipment up today to go with the armor. #heresy #3dprinting #marines #terminator

The bloody Lancer pattern and the basic Hades upgrade kits printed and primed. For some reason the bloody lancer is held up with cults but the Hades is up and ready. More to come, bloody weapons to be redone post haste #heresy #cults3d #terminators

Man I do not know why I haven't posted this stuff up here yet. We have here plenty of shields (the white one isn't done yet), swords, axes, spears, knives, maces, pistols and some heavy armor shoulders. A bunch of these are already available on my cults but I'll update the pack here soon.

Someone had asked me to do a comparison pic of the older Siraya tech Navy gray resin Vs. the Sunlu abs like dark gray, so here's a pic of the newer SolisV2 VoidCrafted Vs the fishmech Commander Frame~

These works remind me so much of Akihiko Yoshida, not in any biting style way but in the feel of the design, it's such a wonderful thing. I may need to do a deep dive into a gallery of theirs.

So I threw up the Lancer armor upgrade kit onto cults cults3d.com/en/3d-model/... Eventually I'm probably gonna do another 1-2 torso variants, another greave variant, and maybe another gorget, a trimmed hip plate, and I might as well toss my bolter into this kit as well for folks #heresy

DEPLOY YOUR GRUNTS!

Sans horns

So I'm designing up a bunch of parts for my blackshield warband, which is a bunch of pirates! I figure a regular skull isn't spooky enough so lets try this!

I do not know why I like this design style so much but I do.

Fleet Commission for @echtasketch.bsky.social This is the Albatross "Lady of the Lyre , a tactical carrier, and her frame complement. #Lancer #Spaceship #Mecha

Oh boy do I love grunts! Gimme stormtroopers, zakus, redshirts!

Love the style, the harsh bight colors contrasted with dark armor. I really wish I could still enjoy Destiny as a game but it's concept is still great to think about.

This design style (the armor) proportions and lines caught my eye and it looks cool and cute at the same time.

Holy crap, I love unit composition designs with tons of minor variation. The stories that arise in each small tweak!

So I did my Oth Pattern helmet months ago and I've decided I need a trencher variant helmet. Chocolate and peanut butter here. Armored variant in yellow and I'm not sure if I'm gonna tweak it some more.

If you see this, QTP with a sword.

Okay I love this in design and concept. I'd love to see more in this line.

Oh man, It's like a rifleman but with full digitigrade legs and a neat angular head. Oh man this might actually drive me to design a new mech!

Villains (and other characters) don’t always have to be complex and multi-dimensional. Sometimes a good, iconic villain can simply be a guy that walks in and shouts, “I AM ARAGHAST OF THE BLACK LEGION. PILLAGER OF A THOUSAND WORLDS. YOU WILL MEET YOUR END BY MY HAND!”

So I think I've gotten a good basis for my bike support I figure this is good enough for 1 and I can do 2 minor edits of the flow for the rest and there's a squadron. This shape fits on the standard and my oval bases and is about the same height, might make this hollow for ease or let users do it.

Stuff like this makes me wish I did 2d instead of 3d. I'd love to do some really abstract creatures and maybe even go full non Euclidean geometry with angels. Love this design, so jealous.

I'm suddenly considering doing a small single pilot mech in this style or at least with it's lines. Can't say I'd mind the break from my goldenrods but I'd have to think how I'd handle this...

So the bike is now up on the purple site with a dedicated twin laser prow and 5 swappable weapons on a 2nd centerline mounted prow. I'm proud of how this project has turned out. Still to do is a support for the base (or 3) and maybe a unique plume (or 3) to flow with the model cults3d.com/:3562506

So at CtA I ran into the fight I didn't want. Primarch on the board. But I anticipated this and constructed a custom Valdor for this very situation. Magnus fought hard but the Captain-General of the Ten Thousand came out on top! #heresy #Custodes #CallToArms #warhammer #legiocustodes

Okay so CtA came and went so I'm back to the grind, slightly edited the rear for an engine locking collar that hides the entire seam seen in the model photo. Still uses plenty of plastic parts (head, torso, shoulders, plates) so it's a conversion kit but I hope y'all like it! #heresy #Custodes

Getting geared up to go to CtA this year. So I'm trying to rig both armies that are coming with to be as bespoke as possible. Lets start with the goldenrods. The Spears are now set for poses and unique with new versions, and the bike moves along! #custodes #3dprinting #jetbike #heresy

From the mastermind behind GTFO, Payday, and Payday 2 comes the next evolution of co-op heists. Run unauthorized errands for Midway's corporate elite – from sabotage to assassination, business is booming. #TheGameAwards Ready for the job? Wishlist DoW on Steam: dow.gg/steam

So I got distracted again and worked on a bunch of armor parts. Again bare legs, back, arms, claws, fist, and the mk4 model (on the right) helmet are someone else's, the rest of this is my work. More to come with these big boys. #horusheresy #terminators #warhammer

Okay been a sec, things happened and now my work focus is all over the place. Currently I'm working on this, a grav bike for janitors. This image is from a test print version that I need to get some confirmation off of before sculpting more, so I'm kinda stuck til it finishes. #custodes

See I wish I could do stuff like this in blender. I can do all sorts of hard edged mathematical things in CAD but some of the sweeping curves would just be easier if I could sculpt them then kitbash in my hard designed pieces, merge it all, then mirror from a central plane. Envious as hell here.

Showcase animation of a Custodian Guard of the Adeptus Custodes that I made #Warhammer40k #Animation

It's got enough room for me & the whole squad ⚔️

This is pretty well everything I've done in this vein so far. The packs on my cults page include all of this but also has the pole arms as variable setup in a blender file for mix and match. I'm running out of ideas here. Any help? #warhammercommunity

The attitude of a grizzled veteran. As one and being self aware enough it's clear that we weren't like this before, and it's not just the time in service, it's... things.

I realize that the 20 year old 3d model of a dreadnought really shows how long I've been making fan art of Warhammer. This Rhino is older still. Fear the creaking of my bones!

3d Modeling, Day 01 Many moons ago I was a prop artist for PS2 era games. Over the years I let that atrophy. I decided I wanted to change that and relearn, then didn't. So I'm trying again & posting about it to keep me honest/on track. First up is re-learning interface. Old models for attention :P

[Added Alt-Text]

So This was a project that I was working on hammer and tongs until recently. Pano rules added in grav raiders to 2.0 of HH and so I felt a burning need to have one. #warhammercommunity #custodes

It's either very telling that I've curated my sphere that I don't see anyone complain about these edits, or maybe it's the fact that these sentiments are so true to the soul of the game that the real fans don't mind in the slightest. Anyways, happy pride month.

Preview on the next set of stuff to go up. Or rather an update to an existing set on my profile.

cults3d.com/en/3d-model/... Okay so New kit up on Cults, Mk4 Heavy Upgrade Kit 2nd picture is with a couple of other artists but the back and legs are 100% good fit match with plastic, arms are plastic as well. I've test fit the whole rig onto plastic parts and it's great.

Finally trying to set this up to show off some of my design work. Let's start with some of the new armor parts for existing kits. These files will be be getting sent to cults3d.com/en/users/Oth... "soon"

I don't usually "do memes" but I'm about to hop on a 7hr flight so I say we do a #StarTrek meme roundup today. Dig deep, and bring the best you got! Most liked meme wins 5 Stanley Nickels!