Got most of the exterior torso set up for the interior~ I'll be working more through that next Friday~

Alternatively, godforgeminis.com/collections/... For *most* of the mech stuff if you don't have a printer~

Arkhos Setup~

Working on setting up the arkhos variant. I wanna give 'em a big ol' cape connecting to the two pauldrons, but that'll get modeled once I set up the actual pose. Which is a bit rough cause 28.5mm bases suck, and they hate me. (and a lil missile styled alt)

Custom 1/100 RX124 TR6 Woundwort kit. Granted, this is still a long way out, I have a bunch of other things left to finish on it, like the composite shield booster still needs to be finalized/modeled, packaging, etc. etc. But at least, this part is done finally, and I can finally post about it x'D

Re-Vamping the Spooky bone bois to V2 for Spooky month~

Ooo I like this:

Custom 1/100 RX124 TR6 Woundwort kit. Granted, this is still a long way out, I have a bunch of other things left to finish on it, like the composite shield booster still needs to be finalized/modeled, packaging, etc. etc. But at least, this part is done finally, and I can finally post about it x'D

Turntable for the v HafocV2's~ (Not sure why the animation starts fast and then slows down I don't understand how blender works XD)

HafocV2 Bitspread~

My entire office smells like tamiya panel liner and lighter fluid, and it's gonna kill me :c

Hafoc's V2 Arkhos variant~

After months of using a little tankless iwata compressor, I have finally been liberated.

I'm so close to being done with the Hafoc re-work x'D

¯\_(ツ)_/¯

Chonky leg~ Wrapped up the legs, and thus the easy part is over x'D Getting into the torso next Friday~

My bud Dafy of DaffMakes did up some cute poses for me using the Skorcian frame and they're too cuteee

Updating the welcome set for my site finally~ I wanted it to be a lil' sample set of both factions I've done and I think this is a good little set~

From Stream today~ Got a good chunk of the legs worked out, gonna finish them off next Friday~

I'm gonna be modeling out the hip for ⁠Project Morningstar Shigue Combat frame tomorrow at noon on stream. Project MorningStar should also be announcing the Collab between me and them sometime soon as well. twitch.tv/pipermakes Be there or don't, I'm not your mom~ ~Pipes

Anyway, here's some little guys from this months set! (28mm bases)

We love finding out all the scuff for file distro first hand when you're trying to send out filesets for the month x'D

Having a thing you've been working on for a while now, but you can't post it to main yet is actually killing me. I wanna share it with everyone but I can't yet :'c

Ia Ia! And the count goes ever on~ (thanks for 500 followers, I like this site a lot x'D glad you all think my stuff is neat~)

pipermakes.art The subscription half of my site is now live in case you too also have a high level of hatred for patreon, now you can support my dumb nonsense to my face, and get cool little guy files every month~ Which would make me (and maybe you too) oh so very happy x'D

August's fileset, Skorcian V2s~ (4 images isn't even close to covering it xD)

Some more stuff from today's stream, and the current bit spread~!

How do you handle lineups bsky? Took all the posed frames from this set so far and lined 'em up. I still gotta get into the pointy legs, and some more alt weapons, but this has been a good couple a days~

Just a few more guys from today's stream added to the render~

Is this something Chat?

I think I'm gonna do a little longish posing stream tomorrow to stem some of the monotony~

We love a good GreatSword Pose~ I love this style of dynamism, I think it conveys a good bit of motion through it~

And there's a quick lil group set up before I get into the more dynamic posing~

There we go, lil update so they're not just the base leggies (outside the bladed tippytaps of the other leg alts~)

SkorV2's base is all set up, and I've been working on some of the arms/poses for the arms and that's *boring*. I think I'm gonna get into the lower leg tomorrow, there's a thing I wanna try with the foot~

Somthin' like that~

I'm doin more with this form. Gonna have it climbing up a ruined column. The Aracort had a lot of motion to it, but I want this one to be a lil sneaky~

Anyway here's one of the funnest things I've ever worked on:

pipermakes.art I finally have my own site for my stuff :D This is huuge for me (personally, I've wanted to set up a sub thing that isn't patreon for my stuff for like, years now xD)

I've got at least a couple gunpla enthusiasts on here, does anyone have any leads on what kind of studio process goes into making a garage kit when I am just a 3D modeler? Like, do I reach out to a studio for that? Anything's helpful, it's something I don't really know/understand.

Piper why didn't you use MMF for file distribution/hosting?? Because I have principles. And regardless of whether or not they hurt me, I stick by them.

I've been working on the site design today after finishing the uploading of all my filesets to the new site, and they really will just let me put words there huh

Mech thigh gap. Send skeet.

Hip to waist ratio 🤌 (Working on the SkorcianV2, probably gonna be up there with the Vacarsield for most edited V2

I'm back with my Woundwort bullshit. FDM printed 1/35 Woundwort~ (Little 1/144 woundwort for scale~) The fileset I used is on CGTrader, but I edited and remodeled/modeled *a bunch* of it for this.

Anywho, no context:

AracortV2 test print/assemblies~ I really like these lil guys! 28.5mm base, with I think a 30mm for the quad frame~

If you see this, post your older art! (Cuttlegeist Frame from 2023)

~Spin the Spooders~

Spooder posing~