Hey Hey remember those cloaks For your Aphrodites Look

3 orders shipped today. The experiments needed to get the ratios down was a whole week affair. We resume horsebutts, and humidity willing, remastering the Goblins. Also got my printer parts waiting for me to install em, so, new projects WOO

A PROD UPDATE GOOD LORD THIS TOOK FOREVER The cure retardant seems to have done the trick. Fudging the cure times based on the mass and poking every 30 minutes let me successfully cast cresteds. Only problem now is the bubble tendency. Gotta write to the orders before ship.

9 out of 10 goblins agree human dick is the best, and you're gonna work hard to convert the 10th

0020 With 2% Slojo results after 12 hours. Overall this has shown the most promise. It does seem like overloading the material is a very real, and easy threat. Still pushing it if you arent on the dot with pour times, but it should be doable.

Ive been staring at this specific Shadow Lugia's titters for the past 3 weeks trying to get it right It doesnt help that all my screens show slightly different colors

something green's got you distracted today? typical

And the end results. Maxing out on the Slower DOES work. Perhaps a little too well. Mixing the slower WITH thickener creates an unintentional overly soft zone. The results aren't super consistent, but risky enough to warrant a lower % next run. Took 13H before peeling.

IT’S DONE! Started this back late last year after Dreams had their big update. It’s a bit rough and rushed in some places but I’m extremely pleased with it and the things I learned. Huge thanks to @htharpy.bsky.social for the VA/SFX work. Part 1

Hopping Bunny 🐰🖤

Alright, so actual prod update Because it's been Thunderstormy and Floody lately, I can't reliably use the Vaccum pumps for extended periods without risking a power outage and catastrophic accidental repressurization. So we're doing Slojo + Thivex tests for cresteds.

I now have to be VERY careful not to leave this book lying around now that I have a kiddo that will eventually know what a vaporeon is. And then KNOW WHAT A VAPOREON IS. Thanks @bnbigus.bsky.social

Follow up, flawed aphrodite mold has been taken to the back, sent up the farm, and the new mold has passed muster. We resume boobiecasting.

Prod update! The first successful cloak prototype has been completed. It'll be a few more days before we open up sales for it, but soon!

The warmth of many soft bodies wakes you up alongside soft bell chiming as the girls come in for their morning duties. It's another day in eeveelution paradise. <3

Just a batch of 6 this week; all of them premades and the giveaway prize, sorry folks. A bunch of failures at once in the week is usually a sign that I need to just stop for a bit and get back to work when I'm rested.

How that turned out. Instead of curing in 9, it cured in 2. Which is STILL too short to guarantee non delamination. So i have to up the percentage, while also being VEEERY fast regardless. Bonus, what uncolored EF0020 is like. You will never ever get "clear" with this.

a surprised sheep

Slacker additive tests. TLDR "Wow that's disappointing." 00-20 Became tacky and tearable. It'd stick to things, resist demolding, and rip/deform easily under stress. It's SOFTER, sure, but like, already attracting all the lint and has the durability of a backline DPS mage.

So, because the crests keep delaminating ( i.e. peeling off when they shouldn't), I'm gonna take this time to do some science. This is Slojo. It slows down how fast silicone cures. I need a 1% ratio of HALF my total mass. in this case, I'm using 0.15g for 30g for detailing.

On the topic of production; gonna start using the cure retardant to see if that helps with crest delamination. The problem I'm facing *NOW* is that the ratio is 10g:1000g. Which means for my purposes, I need... 0.15 grams. My scale doesn't go that low. So uh. This'll be fun.

Quickie; these ladies have not passed muster, and will be up for grabs as flops. The flaws aren't bad at all IMO, aside from the crest which has been silpoxied back together. Purple is in full 00-10 THIN, and the Definitely-Not-Copyright-Infringing one has soft boobs, 00-20 everywhere else.

And there's our winner! ... Again, apparently! Man's got some gacha luck. Might have to start setting up entry restrictions for previous winners. I got some messages about entries not being seen, despite following the rules. I appreciate the reaching out; Twitter being dumb.

got room for a glowy magic shortstack? (atlyss fanart)

First attempt with new Aphrodites. I decided to tackle the most time consuming ones that require the special pour cup each to get em out of the way. I think this backfired. Crest got a bit of delam, the Purple one had some tummy spillout, and I have NO idea what in the hell happened to the belt.

New loop animation available~ Mira's va - @nami955.bsky.social there's always more content available on the subsites, your support is what makes all of this possible!

VERY late, but entry tracker's up! docs.google.com/spreadsheets... Two days before a winner's decided, and I get to ship out on Saturday!

🍎🍎🍎As a follow up to an amazing li'l Collab i did with @mouldforgedshop.bsky.social , I bring some goodness to you guys In his Own Words: "Code for the 15% discount off all Horsebutt and the 00-10 THIN Material you got is "ARGOS" ( Or, click this link: mouldforged.myshopify.com/discount/ARGOS )

Prod update! Aphrodites have been rinsed, and their cases readied! We're casting TIDDY tonight! Flower case also arrived. Flask for scale. Master is pending my printer parts, but SOON!

The fan started moving backward and sliding off the platform. So naturally, shop clamps. Now they can air dry the molds on a step ladder. In my shower. If it isnt obvious that I'm not a big factory owner, I hope it is now.

Prod Update! Aphrodite molds all finished! They just need to be Soap + Hot water washed, then dried before I can make the pours. By sheer coincidence they all also have THAT color pattern.

"I should be able to just take a picture of dildo shadow cleanly on the cheeks, right" Lmao no

FFXIV: Merciless The ravenous potato, in a rare moment of lucidity, offers you one final warning: No quarter will be given beyond this point. Do you heed her?

Prod Update Molds coming along nicely. New Podge, Gobknob, Bun, Wide Ponut, Lifesize Gob, AND an Aphrodite. The Aphro is part of an optimizing pass; the Crested Mold version is so much more consistent, so I'm phasing out the old Aphro cases. No dangerously thin spots anymore.

Still working on the content for the first night with Poppy. It's getting there. It's getting there.

My lovely assistant has recovered from tbe joys of motherhood, and is getting to make more cloaks! The inside is still a little frayed, so we're looking for a solution to that first. But SOON available, for her to fund her pokopium

The caveat to having a BIG Fuckin' resin printer to make your tiddy masters in one piece Is that you're unlikely to find ANOTHER person with a SIMILARLY huge printer AND will print a tiddy statue for you of that size and ship it. Which is to say I could probably offer that service. Niches baby!

To think I've been an artist for years and this is the first time drawing Isabelle Va by @TheBredFactory_

14 orders dropped off today Still rainy and humid, so I can't prime masters. It'll be shop cleanup and moldmaking as we go.

Shy and horny

Morning pulls. Burned through all my remaining 00-10, including the reserve buckets. An order for a wide, superdupersoft applehorse has failed twice now, so I called it from exhaustion. Packing now, so if you're a girthy fella, now's your chance at a discounted soft one.

Prod update Goblin masters almost done, but then the gods decided it will rain for a week straight. Cant paint in the rain, so masterwork is put aside. Goobold done, but has a random bubble. I dont even. Pivoting to remolding and 0020 ponuts.

Take a good, long look at the display markings... This is where the "luminous" part of "luminousamphiptere" comes from. (Work-in-progress photos in the replies.)

Had to wrestle my artblock into submission for this one. I got kinda lazy at the end, but eh. Behold: a goblin/imp hybrid plays with glowsticks the WRONG way (this is why the butthole is unusable I guess) Also cameo from the bad lineart when I was trying to feel out the pose.

Prod update Everything sort of arrived midweek. Boxes, nee bucket, additives, etc. The flop Crested has been poxied back together. Listing will be updated, and orders packed.

Womb Kiss public release Get pregnant get pregnant

Prodwork Primer coat after the first sanding to see if there's still some stinkers. There's always at least one.

Production Update. Printer FEP got a hole while running. I cannot print while this is a thing, so any new masters or rods ( i.e. Aphrodite) will need to wait until I get a new sheet. Goblin Masters are thus the only ones I can process. 00-20 Bucket incoming.

Art of a possessed werewolf!!! Really tried to base this off of the toy itself but, between software glitches and my own lack of skill, there were some speedbumps along the way lol (I do apologize if this isn't high enough quality to work for the giveaway😞) Also, wips below!!!

Minty marina