Got the legs done on the PG 1/60 Zaku II today. 🙂 #Gunpla

Got my first chase variant Funko Pop! 😄 I don’t usually hunt down the chase variants, but I really wanted this one. 😄 #HazbinHotel #Funko

Got both of the arms done for the PG 1/60 Zaku II, now. 😄 I’m still not sure if I’m going to use the sticker decals or not yet. We’ll see. Next up comes the legs! #Gunpla

Got the other arm of the PG 1/60 Zaku II built today. 🙂 #Gunpla

Got one of the arms of the PG 1/60 Zaku II built today. 🙂 #Gunpla

I haven’t had much luck with Pokemon booster boxes as of late, but DAMN did I make out like a bandit with this Yu-Gi-Oh Retro Pack 2 booster box! 🤩 15 out of 24 packs in the box had hits, and I pulled some really cool ones, too! 😄 #yugiohtcg

Started working on the PG 1/60 Zaku II today, and man was rigging up this LED a pain in the ass. 😩 Still, it definitely looks pretty good, though. 🙂 Now that I got that bit done, the rest should be pretty easy. #Gunpla

Here’s a better shot of the HG 1/144 Char’s Zaku (GQ). 🙂 The bulky thighs make certain action poses a bit of a challenge, but if you fiddle around with it long enough, you still get it to strike some of those classic Char poses, #Gunpla

Finished the HG 1/144 Char’s Zaku (GQ). 🙂 I had a lot of trouble with the red and white line decals on this one, so I used paint in place of most of them. #Gunpla

Always happy to share some of my favorite builds with fellow Gunpla builders! 😄 #Gunpla

After taking a break for a month because of the holiday season and gift shopping, I’m finally getting back to Gunpla. 😄 #Gunpla

I bought a few of the Blokees Marvel kits, and overall, they’re pretty cool! 😄 #Blokees #Marvel

I can never get over how fun these Blokees model kits are. 😄 They’re super easy to build, and look amazing straight out of the box. I can’t recommend Blokees model kits enough. 😄 #Blokees #Transformers

Here are some better shots I took recently of the RG Wing Gundam Zero. 🙂 #Gunpla

I finished building the RG 1/144 Wing Gundam Zero. 🙂 I have to say, it’s pretty sharp looking! #Gunpla

Hoping to see Predator Badlands today if all goes well.

Here are some better pictures of the HG 1/144 Gaia’s/Ortega’s Rick Dom (GQ). 🙂 #Gunpla

Got the HG 1/144 Gaia’s/Ortega’s Rick Dom (GQ) put together, and this thing was a breath of fresh air! Very few stickers, the stickers it does have are easy to apply, very little panel lining or paintwork needed, just a fun and overall relaxing build. 😄 #Gunpla

Got some new Blokees kits today. 😄 It’ll be interesting to see what I get in the blind boxes. 🙂 #Blokees

I don’t buy these 30 Minute kits very often (don’t ask why they’re called that, I don’t know XD), but I saw this 30 Minute Fantasy Rosan Knight and liked him enough to buy him. 🙂 I’ve always digged the black knight characters, so I chose him over his counterpart. #30MinuteFantasy

Finished the Lego Batman Forever Batmobile, and it is gorgeous! 😍 Lego did such a good job with the detail on this set! Definitely a must have for fans of Batman Forever! 😄 #Lego

Got a Lego project to work on today! 😄 #Lego

Random ass thought of the night: Why do we park in the driveway, but drive in the parkway? 🤔

Due to birthdays and the holidays coming up, I won’t have too much to spend on my usual hobbies for the next couple of months. I do have some Gunpla and Lego pics planned, though, so stay tuned for those and usual random goofy thoughts. 😂

Got my eyes set on a new Lego project. 😎 #Lego

Here are some pictures of the MGSD Gundam Aerial that I worked on earlier this month. 🙂 #Gunpla

Here are some more pictures of the HG 1/144 GFreD. 🙂 Overall, despite the paint work and marking decals being a pain in the neck, I still love how this kit turned out! The articulation is stellar, and the color scheme and design really make it stand out on display. 😄 #Gunpla

From the Larchives.

Got the HG 1/144 Gallus-J put together. 🙂 While it looks really cool, I think I might have to be honest and say that this is the first kit of 2025 that didn’t blow my mind. It feels a bit like Bandai took a big leap backwards with the articulation on this kit. #Gunpla

HG 1/144 GFred complete! 😄 The marking decals on this kit were a royal pain to apply, and I skipped a few on the legs all together. Overall, though, this is a really nice looking kit. 🙂 #Gunpla

Finished getting the MGSD Gundam Aerial put together. 🙂 I like that the shell units can be switched out easily replicate the Permit Score Six state, but the almost smoke black clear parts that go over them make it hard to actually see the color of the shell units. #Gunpla

Finally got around to taking some good pictures of the Blokees Action Edition Transformers One Optimus Prime. 😄 This really is a fantastic model, and I absolutely love it! #Blokees

One of the biggest things that sucks about social anxiety is that a lot of people can’t see past it. They only see that one thing, and don’t bother to look underneath. I’m very blessed to have real friends that can see that there’s more to me than being shy and quiet all the time.

Today’s project! 😄 #Blokees #TransformersOne

Mega Evolution booster box prices on eBay went up from $260 to $300, and now I’m really questioning whether it’s worth it. I really want some of the cards in the set, and I’d love to open a booster box on my YouTube channel, but $300 a box is getting pretty steep for me.

Pokemon card prices are getting insane lately. I wish places would stop using TCGPlayer as a source for market prices, because lately it seems like there’s a lot of market manipulation on that site.

Here are pictures of the RG 1/144 Shining Gundam. 🙂 I have to say, I really like this one! Although, I might be a bit biased since G Gundam is my favorite Gundam series. 😂 #Gunpla

Here are some better shots of the HG 1/144 Light-Type Guncannon. 🙂 The color separation on this thing is amazing! If you look closely, you can still see where I did use paint, but very little is actually needed for this one. #Gunpla

I forgot to post about it, but I also completed the HG 1/144 Xavier’s Gyan Hakuji-Packs. 🙂 #Gunpla

Got the HG 1/144 Light-Type Guncannon complete. 🙂 The color separation on this thing is stellar! A major improvement over the poor color separation of the HG 1/144 Red Gundam. 😄 phenomenal color separation on this one! #Gunpla

Getting ready to get started on this kit, and Bandai took the hint after The Red Gundam, because almost everything that wasn’t color separated on that kit has been color separated on this one. And thank Christ for that! This kit is going to be way easier to do the paintwork for than The Red Gundam.

I had to put off building this by almost a week due to having Covid, but I’ve felt well enough the past few days to get the RG 1/144 Shining Gundam built, and it looks great! 😄 Stellar articulation, too! This thing will have no trouble striking action poses! #Gunpla

I am loving these Hearts of Steel figures! 😄 Optimus is definitely my favorite of the pair, but I really like both of these of these guys. 😄 I don’t know if I’ll get the other 2-pack that has Bumblebee and Megatron, but we’ll see. These guys are great, though! #Transformers #HeartsofSteel

Got the Blokees Classic Class DX Jet Wing Optimus Prime finished, and he is AMAZING! 🤩 This is without a doubt my new favorite Optimus Prime kit from Blokees! 😄 #Transformers #Blokees

Being a big fan of the Transformers Blokees kits, I absolutely had to have this guy! 😄 #Transformers #Blokees

Got the MG 1/100 Jegan finished. 😄 I really am surprised that I didn’t pick this kit up sooner, because this is actually a really nice kit! The articulation and color separation are stellar, and the build itself was very enjoyable. 🙂 #Gunpla

Working on the MG 1/100 Jegan now. 🙂 Not a lot of panel lining needed on this one, so I was able to get most of the panel lining done yesterday. This is actually a pretty good kit so far! I’m surprised that I slept on getting this one as long as I did. #Gunpla

Also, I’m finally the proud owner of a Switch 2! 😄

Got the MG 1/100 RX-78-2 [Origin Ver.] finished. 🙂 it’s mostly a pretty solid kit, but I hate the MG 3.0/Ver.Ka style hands. Each hand has a finger that pops out really easily (the trigger finger on the right, and the pinkie on the left). #Gunpla

I did what I could with the paints I had on hand, but my lord did this one need a lot of extra paint! It SD color separation look like modern MG. 😆 Don’t get me wrong, the kit looks great once you have it put together, but painting it was a royal pain in the ass. #Gunpla