Just uploaded a fidget model. Capybara fidget keychain on @thangs3d.bsky.social and makerworld. Check it out and a like would be appreciated, thanks! than.gs/m/1287757

Uploaded my Capybara Boba Keychain model to @thangs3d.bsky.social and Makerworld. Check it out on whichever platform you use and give me a like, thanks! than.gs/m/1285271

Spent the morning practicing some sculpting instead of my normal CAD work. Currently printing the results after some changes my daughter wanted. Every capybara needs boba I guess. #3dprinting

“3D Boaty” but right side down. Just tuning a @positron3d.com printer using @polymaker.bsky.social Army Blue. “3D Boaty” model by Depep1 on printables.

Big printer test prints. 200% scale “Sphynx Cat” by @sassiecat3d.bsky.social on @thangs3d.bsky.social than.gs/m/1253123 #peopoly #magnetoX #3dprinting #petg

@themitch22.bsky.social tch22 recently lost his job and can only afford to stay in his home until the end of February. 💙 Join us LIVE this Sunday at 11 AM MST for a fundraiser and giveaway stream to support him! Some cool prizes and great sponsors! www.youtube.com/watch?v=iqBG...

Dragon claw dice tower by @sassiecat3d.bsky.social printed in @polymaker.bsky.social Panchroma CoPe.

New benchmark model. Uploaded a model to test bed adhesion, print-in-place, print tolerances, and flexy model overhangs. Great way to double check your filament settings will work with a new brand of filament. www.printables.com/model/114802... #3dprinting

When you are cleaning and can easily move your printer out of the way. @positron3d.com

My 3D printers working hard. I don’t play favorites with brands, I just use what works.

Evolution of my “DYO Wall light box” model on @thangs3d.bsky.social. Instead of embedding an SVG, I used a backlit Hueforge. Printed on my Prusa MK4S.

Want to make your own custom backlit wall art? I just uploaded a new model with a guide to @thangs3d.bsky.social. Requires a 208mm or larger print bed, up to 2 meter LED strip, only 2 color changes, and bring your own image/SVG(comes with starter SVGs). than.gs/m/1237808?im... #3dprinting #wallart

Forgot to share another project I did for my nephew for Christmas. Wildstyle not-Nerf blaster using a variety of @printedsolid.bsky.social Elixir and PETG. #3dprinting.

Last Christmas gift, “Lone Wolf lamp” by Zurlingo-3D with an ESP32 controlled LEDs inside. Uploaded a light show video on my TT, www.tiktok.com/t/ZTYG4tqNt/ #3dprinting #esp32

Esp32 controlled “Lone wolf lamp” by Zurlingo-3D on makerworld. Reused hardware from an @alieneila.com mystery UFO from June. Printed in Ambrosia Galactic Velvet Black.

Having fun playing around with a light box and LED filaments. 3D printed transformer models by Maxlab. Printed in PLA and PETG by @printedsolid.bsky.social

Video of what I was using in my last post. www.tiktok.com/t/ZTYq4wvrH/

These LED filament strands are pretty neat, have some projects in mind.

Alright think I have made enough for Christmas. Three transformers done and onto my other projects. Models by Maxlab and printed in PETG/PLA by @printedsolid.bsky.social and Yousu.

First one done! Autobot phone stand, next is the Decepticon version. Model: Transformers Phone Holder by Maxlab. Printed in @printedsolid.bsky.social Blood Red light glitter PLA and “Grey” PETG for the joints.

Last minute birthday gift. CatBot by STLFlix. Reposted this as I forgot the most important part, whiskers.

Uploaded some clips from my late night Speed Boat run on my @positron3d.com . Would upload video here but video gets bit little crushed. www.tiktok.com/t/ZTYUfVemW/

Broke the 10 minute mark, not the cleanest but strict speed Benchy rules on my @positron3d.com

Finally done tuning after some upgrades to my @positron3d.com . Changed over extruder to a custom Sherpa Micro for Bowden, tested at 37mm3 flow. Using a new cooling duct by Olli3D, and got adaptive mesh working on the PCB bed. #3dprinting

Caturday…..our cat after my daughter put a necklace on her.

Current project. Remixing a Sherpa micro extruder for my Positron. Swapped motor and gear placement, added horizontal mounts, and added endstop mount.

Was going through some old photos, and don’t know if I ever shared these Prints from my old Ender3. Were custom made Christmas presents.

One of the coolest designs I have seen in a while. Engineered by Olli3D. If you don’t know what it is take a guess. @positron3d.com

For those of you that like puzzles, here are some models I made a little while ago. CPU puzzle on thangs, printables, and makerworld. Have yet to see someone solve the 6x4 version.

Some of my first projects on my old Ender3. This was just about 4 years ago, time flies.

Late night Bluesky post. My 30 second review of PrintedSolid Elixir. Same gcode for each print, random silk vs Elixir….and no printing them upside down on a Positron doesn’t affect strength.

The prettiest tool I have printed. A friend wanted a fancy box opener. “Gravity Utility Knife” from printables. Printed in galaxy black and burnt titanium PLA, and PETG-CF for blade holder and parts.

Today’s random print, TPU Gummy Bears model by @karenchaudesigns.bsky.social with a squeaker by “SpoolDesigns”. Printed in @cookiecad.bsky.social TPU, some assembly required….sound up.

Wendingo skull light model by sassiecat3D, printed in PETG. #3Dprinting

Haven’t ran a multicolor print in a while and now I just want to build a BoxTurtle AFC for my other printers. Mostly for filament runout and support interface, but occasional multi material is nice. Photo of multi color PETG.

Intro: My name is Joe, my day job is IT and I help where I can on the @positron3d.com team. Started 3D printing in 2020 like many others and quickly became IT for 3D printing. On a slow day I help 2-3 people with their printers. I’ll post my current prints or projects here and TikTok. Todays fun.