Airfix 1/32 Austin Healey Sprite 1961 Bagged Kit, brush painted so don't look too close More ⬆️

l was planning to use Hasegawa's Mirror Finish for head ramp, but it's too old and no longer bright. Suddenly, I recalled I bought silver chrome marker some time ago, then tried to use it. Unexpectedly, the effect is quite good. #DaytonaLM74No54

l haven't updated progress for a while as it's not drastic. The recent progress is fixing window, and then glued tyres. #DaytonaLM74No54

東京AFVの会『懐かしい部門』で3位を受賞しました。投票して頂いた皆様ありがとうございました。 副賞は10代の参加者の未来に期待するということで譲らさせて頂きました😉

1/72 Heinkel He 111 Z-2, version is 4./KG53, Eastern Front winter '42/43. My second entry for #HeaviesGB in #histscalemodels

One word, " Great ! " youtu.be/h2Mogj9E8mE?...

Sometimes I see #modeltrain weathering so good that if it wasn't for the fingers i'd think it was real. I don't think I ever get bored by how good so many modelers are at making tiny thing look big.

今シーズン初のおでん。 関東だからちくわぶはマストアイテム🍢

Cut a headrest at this stage. I think myself lack planning skill🤣, but I found shoulder belt seems unnatural if leave it as it was. After cutting, add a mounting stay so that there is some space to put belts. #DaytonaLM74No54

Wow! youtu.be/DFq_9r8CvHQ?...

Made seat belts. Belt itself was from metal bottle top of wine bottle. Fittings are from Z model's PE. The color is by Creos 's Blue. Later, I will remove a color on buckles. #DaytonaLM74No54

！！！

Q🔔ワーゲンのジャッキアップのやり方は意外と知られていない😮

ライフオンホイールズ 伊藤康治さんのルノー5のジオラマ 凍結路面の表現、楕円形のレイアウトでの空間の切り取り方、カウンターステアをあてることで生まれる躍動感など見応えがあった 旧キャンパスフレンズなどを元に作成されたというフィギュアなど、工程の途方もなさに気圧される

ライフオンホイールズ このハーレーは1/6らしく 1/12よりも圧倒的に実車に近いなと思った 俺もデカいバイクやらないといけんなこれはと思わされた

ジェレミー・クラークソンじゃねえか再現度たけぇなオイ！となったやつ

友人が購入したQ🔔ワーゲンのクランクを使ったエンジン始動。さすが本物のエンジン始動です👍

Funny

There were some fault on decals in terms of it's size, but I finished with my best effort. Next is clear coating. #DaytonaLM74No54

Move forward. Check the center and use a masking tape as a guidelines. The one on the front hood and roof is not that difficult, but the one for the rear section is difficult. #DaytonaLM74No54

Harvest moon

As per weather forecast, it will be raining coming days. Then, decided to paint body. Still wondering if I missed something to do before painting though. #DaytonaLM74No54

A shift knob is with nickel silver rod and solder. Glued a nut to the floor for fixing on the case. Steering wheel from the kit looks not so bad, then I will use it with a little refining. #DaytonaLM74No54

Who's your favourite Jedi? Wrong answers only.

#weirdcarbs youtu.be/VWAdaqiQUbY?...

Today's work. I carved out the mold for the air vents on the dashboad and decorated them with tiny washers. The nose cover I made previously was not good, then built again. I checked the tire alignment. The front heights are different needs adjustment. #DaytonaLM74No54

"Nobody knows why...." 😂 Except Google. 😂😂😂😂

I love everything about this

The exhaust pipe was molded together with a floor part, then replaced it with brass pipe. When replacing, I broke a floor brake lever accidentally. So, made it from a brass rod. It's an unnecessary work if only I am careful enough... #DaytonaLM74No54

It was difficult to make a proper length and angle for latter 2 bars, but finally done. However, I found there was no space to put inner details between door and cage. 😂 I think I have to give up to place it. #DaytonaLM74No54

1/72 Kawanishi H6K5 Type 97 flying boat model 23, allied code name 'Mavis'. Version is Yokohama Naval flying group, Solomon Islands '42. My entry for #HeaviesGB within #histscalemodels

I know what was the motif , but I can't help to recall Dome Zero.

Today, I started to make a roll cage. I chose 1.2mm diameter brass rod. Front half is not very difficult. 2 rods on the rear shelf must be difficult. It's carried over to next week. #DaytonaLM74No54

Finally, I'm back. This is a racing car but there are linings which is same as 'Stradale'. Kit's molding is dull and shape is wrong. Then, removed them and rebuilt . #DaytonaLM74No54

www.italeri.com/en/article/858 How come Italeri knows my favor.

Today, I went to replace the problematic phone. Mine could not turn on the power , it happened all of sudden. www.sony.co.uk/electronics/...

Cheers

I was unwilling to do this as it's not easy, but have to face against it. Cut brass plate and make a round shape to fit into front window. Filled putty from behind to make it steady. Polished a surface. The preparation of vacuum forming is done. #DaytonaLM74No54

Vacuum forming was done and it seems the shape fits mostly. Cut them and try to fit them. I know I need to adjust the size again after painting due to paint layer, so roughly adjusting is fine at this stage. #DaytonaLM74No54

The reservation was done. 2 weeks to go.

My device is affected and suddenly shutdown and cannot boot up any more. I salvaged an old device and restore applications. Sooner, I will go to replace the Mk.VII device. www.sony.com.hk/en/electroni...

Replicate the shape of the nose using thermoplastic silicone and epoxy patty. The details are distorted, but it's not a matter since this is for vacuum forming of the headlight cover. I will fill patty then it's fine if only outline is replicated. #DaytonaLM74No54

Completed the beetle!! Could have been an easy project but I decided to do colour shift paint, custom chrome, custom wing mirror placement, create and print my own decals.... I'm happy with it tho! #carmodels #histscalemodels #scalemodels #vwbeetle #classiccars

完成しました〜 ARII 1/43 DIORAMA GARAGE KIT DETOMASOVPANTERA GTS

To play models.

Front window is bit difficult dut to its shape. I decided to make it separately, but still vending flat plate is not easy. Fixed by pin-vise and vend by pincers little by little. Roughly made a shape, still need to adjust. #DaytonaLM74No54

Side window molding is by PHE, but front and rear's are not. Then, try to create using silver nickel plate. This is the first time for me to try this. Once molding is done, engraved body for fit it. #DaytonaLM74No54