Todays #wip shot for the Iron Inquisition. I have the clothes blocked out and the robot feet ready to go. The mechanical parts are hard to work with because you end up thinking you need to do more but doing so would make it look too organic. #Tabletop #Blender #Gamedev

Solid progress on blender today, there's going to be a lot of admech inspired nonsense in the way of random packs and tubes but I'm going to avoid adding anything too fiddly. Since they're proxies for arbites I'm avoiding robes and going for a zouave inspired uniform. #Blender #Modeldesign

It only took me 18 years but I finally got my mount in classic World of Warcraft! I did not have the patience back in the day and would always make a new character once I hit the 20's. It wasn't until cataclysm that I reached max level on one character. #worldofwarcraft #orc #goals

Sketches for my Iron Inquisition project, they’re going to function as Arbites proxies for combat patrol and I took hints from welding gear and Zouaves. The chest piece is the least inspired since breastplates can only be so distinct. #gamedesign #scifi

Finished two mechs and compared them to my original rasalhague dominion paint job. It’s not exactly the same but considering I painted them years ago and didn’t write anything down I think it’s good! #Battletech #tabletop #miniatures #minipainting #scifi

Some more progress on my battle tech, sponged on ash grey to get the chipping effect and applied a wash of agrax earthshade. Once they’re dry all I need to do is touch up the panels and lights, I might add some small details to make them a bit more personable. #battletech #tabletop #minipainting

My cat’s a fan of my mind flayer blanket, I know who she’d romance if she could play Baldur’s Gate!

So, I figured out why I'm struggling to work on the character for my scifi horror game; I'm not confident enough in my skillset with blender. My plan is to make more proxy models like I did with the catfolk last year, but this time I am going to make an admech Imperial agents army! #Blender #Scifi

Slow progress on the #battletech project today. Colored in all the windows with demon yellow and goblin green, all the weapons were rubber black by icm and I added vallejo thick mud to the bases before adding uniform grey. #tabletop #miniaturepainting #scifi

Todays progress on my #battletech collection, strong tone over the grey primer, then drybrush the base of your factions colorscheme. #tabletop #miniaturepainting

Next big project, organize my battletech collection into two collections of Rasalhague/Clan Ghost Bear and Pirates, then paint them! #Battletech #Mechwarrior #tabletop

After years of putting it off I finally finished repainting my genestealer cult army for #warhammer40k I’ve played the army since seventh edition but had to sell off nearly the entire collection when times got tough a few years ago and I’m so happy to finish this! #warhammercommunity #tabletop

Calling my Goliath Rockgrinder done, the washes weren’t sitting right and while it gave the muddy look I was going for I can’t really see what else I can do with it. #tabletop #paintingwarhammer #Warhammer40k #warhammercommunity

www.myminifactory.com/frontier/ful... The Lazy Forger does his name a disservice because he's figured out how to make a solid bit of solo/co-op rules for a 6mm scale game. #Tabletop #Scifi #6mmScale #MyMiniFactory

20 neophytes ready for the Day of Ascension! I used to have so many more but had to sell a bunch a few years ago, combat patrol is the right size for me anymore as I don’t have the time for bigger games. #paintingwarhammer #tabletop #warhammer40k #warhammercommunity

Made some great progress on my Neophytes for my GSC! I decided to add more blue to the overall colorscheme to help break up all the tan and grey. All that’s left are the lights and bases, half of which will be dry time. #tabletop #paintingwarhammer #warhammercommunity #warhammer40k

So, I got rid of the chest plate and replaced the helmet with a much simpler design. I wanted "scifi machine technician" and lost the plot, although the base model will be used for a video game the more overdesigned variants will be used elsewhere. #Characterdesign #Gamedev #Blender

Just beat the remasters for soul reaver 1 & 2 and I really recommend it if you like puzzle platformers and goth vibes. The behind the scenes content is really interesting too as you really see how much they had to cut to make the games ship.

Agrax earthshade gets such a nice matte finish over army painter glossy tones. The Hand of the Magus is coming along really well and I decided to add a pop of blue in all the earth tones to add some visual interest. #tabletop #paintingwarhammer #warhammer40k #warhammercommunity

Was about to start batch painting when I forgot that I didn’t get the layer of dark tone on everything, guess I’m waiting a few hours before my next painting marathon. #paintingwarhammer #tabletop #warhammercommunity #warhammer40k

I’m really struggling with designing the minis for my scifi game. I wanted to make everyone look like civilian militias and automated workers but I keep ending up making more professional looking soldiers. I’m going to step away from it for a bit and come back with fresh eyes.

Note to self, do the test model before starting the whole army! I’m really happy with how he turned out but doing white and yellow is a pain. I’m only doing one combat patrol like this so I’m going to keep with this paintscheme. #tabletop #warhammercommunity #paintingwarhammer #warhammer40k

I’m going to try for NMM again and I realized the monster brown I was going to use for the rusty metal also looked good on the purple swarm, this projects shaping up rather well! #tabletop #warhammer40k #genestealercult #paintingwarhammer #warhammercommunity

Letting the purple swarm speedpaint dry on all the skin areas for my cultists, I’m not certain on how I want these guys to look so I’m just going to wing it and see what I get. I have lore written but nothing on their appearance outside being heavily irradiated by run off. #tabletop #warhammer #40k

Painted the armor on my GSC banshee brown, I’m going to paint them the same colorscheme I used in 7th edition which had blue clothes off white armor and red details. #tabletop #genestealercult #warhammer #warhammercommunity

Finished my Brood Scum for Necromunda, it was my first attempt at nonmetalic metal and I went way to bright way too early in the process. I’m going to be listing these guys with my Malstrains on Ebay since I’m already working on so many Genestealer cult projects. #tabletop #paintingwarhammer

Getting back to Blender and I'm liking the design for my scifi dude so far, I'm going to add chainmail to the loincloth and shoulder pads then have a hose where its mouth will connect to a vague device; After all that I'm going to design some faction symbols. #Blender #Tabletop #CharacterDesign

6 Malstrain Genestealers ready to terrorize the honest people of Necromunda! #paintingwarhammer #warhammernecromunda #necromunda #warhammercommunity #tabletop

Nearly done with my malstrain genestealers, they are a lot easier than they looked since you really just dry brush multiple brown layers. #paintingwarhammer #necromunda #warhammer40k

Getting started with my Genestealer Cults for both 40k and Necromunda! I don’t think I’ll get this done as fast as my Death Guard but I’m excited to get this year started off right! #paintingwarhammer #warhammercommunity #tabletop

With one day left in the year I finished my Death Guard! I’m so happy with how they came out and the progress I made this year amazes me! #paintingwarhammer #warhammercommunity #tabletop #miniaturepainting

Just waiting for the texture paste to dry then I can finish the bases and my combat patrol is ready to get on the table! This is honestly the fastest I have ever painted something like this and I am mostly happy with the result. #paintingwarhammer #warhammer40k #miniaturepainting

I’m extremely happy with how the green tone dried, it really adds a soggy vibe to everything without getting rid of the shine from the brass trim. #paintingwarhammer #DeathGuard #warhammer40k #warhammercommunity

More progress on my Death Guard! #warhammer40k #paintingwarhammer #warhammercommunity #Nurgle

Got the first layer of crusted sore red on the death guard and grim black speed paint on the silver bayonet!

Got a layer of runelord brass on my Death Guard and I think I’ll focus them down before new years. I also primed my new Silver Bayonet forces with wolf grey from army painter, I ran out of ultramarines blue so my french have an accidental zenithal highlight.

Got the Maggot Lords combat patrol for christmas and spent the whole day building it! Now to get a game of 10th edition in before it’s over. #warhammer40k #warhammer #combatpatrol #miniaturepainting

Got some new metal models for christmas and I immediately got them in the soapy water! Silver Bayonet has some beautiful designs that give me serious Bloodborne vibes. #miniatures #napoleonic #fantasy

I’m still doing the “work on everything until you can focus on something” method. Slapped some contrast on my blood bowl, necromunda, and beyond the gates of antares mini.

Michigan got a bit of a heatwave today so I took the opportunity to get some priming done! Used the last bits of primer in my old rattle cans but I got my #Bloodbowl #Killteam #Necomunda #Warhammer40k and #Konflikt47 all done!

Still deciding what I want to work on so I put the texture paint on all of my stargrave minis bases as well as my kroot farstalkers, I also put a coat of contrast on my proxy beastmen and breachers for #Killteam. #tabletop #miniaturepainting #warhammer

I’ve been struggling to start any projects lately, so I just put texture paste on all bases for my next few projects. Isorians for Beyond the Gates of Antares, Capitol and Bauhaus for Warzone Eternal, and the Crossroads Cult for Draculas America. #Miniaturepainting #Tabletop

Got the pose for the basic rifledrone done, I could have added some extra armor on but for now I just want to make sure everything was scaled right and it can actually print. In Lychee I used one of RedNebulars grease gits for scale since I know how those print out. #Blender #Tabletop #3dPrinting

My mutant vichy french scavengers for #Konflikt47 are getting some schwertruppen commanders. This was made with frostgrave demon bodies and wargames atlantic french heads and arms. #Kitbash #tabletop

www.tiktok.com/t/ZTrX9hjSM/ Me

Really simple design of a body glove with plates and straps, I did two different heads for the two factions for my game. I chose the straps so I could add extra parts like satchels, other gear, and even more plates. #Blender #Gamedev #Scifi

Redoing my entire model after I already set it up to be printed, I like the silhouette but the model was impossible to pose so the new one is going to not have a poncho for a torso. #Blender #Modeldesign #Tabletop

Had to redo the hands on my models since the fingers kept overlapping.

And here they are my fully painted Uthuk Y’llan collection! #miniaturepainting #miniatures #RuneWars #fantasyflightgames

Finished basing both of my Runewars armies and I am always stunned with how much a simple earth tone colorscheme can accentuate a paint job! #miniaturepainting #tabletop #fantasyflightgames #RuneWars #Fantasy