Could Blue Destiny Unit 3 hold out against the Gundam? #Gundam #Gunpla #ガンプラ

I'm also gonna do two things. I have a fun question to post and another coin toss on whether the next build is the second Ground Type Gundam or the first GM Sniper.

Finished the first Ground Type Gundam, but I decided to hold off on additional photos until the second one is done. I had to fix up a loose part in the chest and strengthen the articulation, since the weapon container can be hefty even when empty. #Gundam #Gunpla #ガンプラ

Made a coin toss for the 08th MS Team builds, and The Ground Type Gundam was the winner. Detailing was tough in parts, had some trouble painting in the launcher in the chest, but I unfortunately didn't have a solid yellow for the emblem in the waist. #Gunpla #ガンプラ

(1/2) #ガンキャノンの日

The Zeong is finished and while it looks pretty good it has understandable limitations. One thing that is unfortunate is the underside port is too wide for my stands connection peg, so it's best to use a solid cradle to display the Zeong. #Gundam #Gunpla #ガンプラ

Got a late start on the HG Zeong and I almost finished it in one go, only the arms and stand left. The range of articulation is understandably simple. Detailing was easy, aside from inking I just needed to paint the beam emitters in the waist. #Gunpla #ガンプラ

The Bits were easy to build and detail, but a balancing act to display. One thing I wish this kit had was that triangular piece the official one has, since there aren't any ports on the top and bottom sides for the included joints. #Gundam #Gunpla #ガンプラ #ジークアクス #GQuuuuuuX

The Gundam is finished and I love how it turned out. The articulation is pretty solid, and while detailing it can be tough the end results can look great. I'm surprised with how well the accessories are with the kit. #Gundam #Gunpla #ガンプラ #ジークアクス #GQuuuuuuX

The body of the Gundam is done. Details were tough in parts, particularly the yellow in the thighs, but I feel good with the end results. One thing to fix up would be the ankle armor since they can be pretty loose. #Gunpla #ガンプラ

The White Gundam won the coin toss and despite how intricate it looks it's been pretty easy. The only part that was tough so far is the head, since the details are pretty tight to ink in. I also love how the metallic cyan I painted looks on the compound eyes. #Gunpla #ガンプラ

Got an update on the backlog since I reached the end of the initial bunch. I got one more kit coming in July, but that'll be a surprise. Now I just need to do a couple coin tosses to decide which kit gets the first build. #Gunpla #ガンプラ

Finally finished the F90 IIIY and it turned out greatly. One thing I had to watch out for was the smaller connecting points for the beam shield and bazooka holsters. Since it's pretty easy to disconnect them when posing, so best to be careful. #Gundam #Gunpla #ガンプラ

The body of the F90 IIIY Gundam is finished. It looks great after detailing, and the articulation is pretty solid all around. The only things left to do is build the weapons and adapter parts for future mission packs. #Gunpla #ガンプラ

The upper body of the F90 IIIY is done. Detailing was tricky in parts, although I love how the head looks after detailing, especially the eyes and cameras. I tried to attach the Core Booster to the back, but it's a snug fit, so I'll attach it later. #Gunpla #ガンプラ

I made a small start with the F90 IIIY Cluster Gundam with its Core Fighter/Booster. It's surprisingly involved despite being a small section of the kit. One thing I needed to do was add an adhesive to the yellow thruster pieces since they can slip out easily. #Gunpla #ガンプラ

Made a small restoration to my Guncannon First Types. My original Guncannon Mobility/Firepower Test Type kit was scuffed, so I decided to salvage the heads and weapons, along with painting them to match as best I could. #Gundam #Gunpla #ガンプラ

The Altron Gundam is finished and I love how it turned out. I needed to reinforce the articulation in the arms and chest since the kit can be top heavy. Aside from that displaying it was a learning curve, especially in regards to the dragon fangs. #Gundam #Gunpla #ガンプラ

Made some progress on the Altron. The lower half was straightforward, only had some difficulty inking in certain parts. I only have the back thrusters and accessories to go. #Gunpla #ガンプラ

Finally started on the HG Altron Gundam. Detailing it is tough in certain spots, particularly in the dragon fangs and shield. Aside from that the arms articulation take some getting used to, especially given the dragon fangs and arm extensions in the shoulders. #Gunpla #ガンプラ

The Gundam Sandrock Custom is finished and it turned out greatly. Aside from fixing up certain details, and the ankle armor joint connection, there isn't any hang ups with this kit. #Gundam #Gunpla #ガンプラ

Finally got some progress in the build, and I'm almost done with the Sandrock Custom. It felt great detailing this kit, although I'd definitely say it's best to do some scribing on the ankle armor since some panel lines are a bit shallow. #Gunpla #ガンプラ

Made a start on the Sandrock Custom and it's going well. Aside from certain difficulties in inking and removing nub marks the builds been easy. #Gunpla #ガンプラ

Made a start on the Sandrock Custom and it's going well. Aside from certain difficulties in inking and removing nub marks the builds been easy. #Gunpla #ガンプラ

The Gundam Airmaster is finished, and it's a great simple kit to work with. Aside from tightening certain joints for the transformation the kit turned out solid. The only thing that took a bit to get used to changing the kit to its fighter mode. #Gundam #Gunpla #ガンプラ

I almost finished the Airmaster, only the shoulder armor, back section, and weapons to go. Detailing was fun to do, and I needed to make sure the the legs were good to go for later. #Gunpla #ガンプラ

Got started on the Gundam Airmaster. I feel pretty good about how it looks so far, only needed fix to do is tighten up the chest articulation since the hinge joint can swing up easily. #Gunpla #ガンプラ

The Unicorn is finished and I feel great with the overall results. I also added a few things from a certain armor set in my salvage box to the kit, only the beam magnum and the beam gatling gun, and now I got a future project in mind. #Gundam #Gunpla #ガンプラ

The Unicorn is almost finished and I feel great with how it's going. The only hang ups I have with the kit are the elbow joints and the leg articulation since they are a bit limited. I also needed to tighten the knee joints connections since they can slip out. #Gunpla #ガンプラ

Just started the Unicorn Gundams build and it's gonna be a long one. Not for the build itself, only for the detailing this kit needs. While I feel good about the lines I inked I honestly wish I had a scribing tool to use on the shallow lines in the shoulders. #Gunpla #ガンプラ

One note about both of the Gundam Mk II kits in my collection is that the ones I worked on are replacements for some of the earliest kits I'd built. The original Mk-II kits were pretty scuffed and are spare parts in my salvage box, but I kept the boxes for the new ones.

Finished the Gundam Mk II and I loved working on it. It's simple and easy to build and looks great after detailing. One thing I had to fix up was the waist connection since it was easy to separate the torso from the waist. #Gundam #Gunpla #ガンプラ

Gotten started on the Gundam Mk II and I having a good time building so far. Detailing was tricky in places, more so in the head and chest vents, also had to sand down some nub marks on the biceps and blue shoulder pieces. #Gunpla #ガンプラ

Sugai's Gelgoog is finished and it's a surprisingly easy build. It looks great, just needed to tighten the ball joints for the back thrusters. It's a bit odd in its knee articulation, but thankfully the legs are solid. #ジークアクス #GQuuuuuuX #Gunpla #ガンプラ

Made a start on Sugai's Gelgoog and it's going good so far. Detailing was tight in spots, but thankfully turned out good. I was surprised by an extra part being included, since it's an alternate chest piece that makes the kit look closer to the regular GM. #Gunpla #ガンプラ

The Light Type Guncannon is finished and I loved it. It's a simple and easy build, and the only needed things to do were reinforce a few loose parts in the feet, along with carefully paint in the black and metallic yellow into the legs. #ジークアクス #GQuuuuuuX #Gunpla #ガンプラ

Got a good start on the Light Type Guncannon. Detailing was satisfying to do, managed to get the metallic yellow just right in certain spots, although I took a liberty with the bulb on the chest. #Gunpla #ガンプラ

The Barbatos 6th Form is finished and it's a good kit overall. It looks great, but I made a mistake when it came to the build. I forgot to reinforce the feet articulation, so I had to use my stand when posing the kit with the wrench mace. #Gundam #Gunpla #ガンプラ

Almost finished the Barbatos. I needed to reinforce the articulation in its arms, shoulders, and knees in case of its maces weight. Detailing the kit felt great, although I do plan on going with inverted colors for the wrench mace. #Gunpla #ガンプラ

Made a lot of progress on the Barbatos. I feel pretty good with most of the detailing I did. I also built the parts for the 5th form and felt pretty satisfied with the painting I did for some parts. Although I was disappointed a certain part wasn't included. #Gunpla #ガンプラ

The Grimgerde is finished and it was an easy build overall. Detailing is the only thing that takes time on this kit. The only thing to adjust for is the shields since the sheathed swords can bump into the valkyrja rifle. #Gundam #Gunpla #ガンプラ

Started on the Grimgerde and it's going good. Only had some tight spots to detail, almost missed the camera in the neck. #Gunpla #ガンプラ

The Rouei duo is done and they turned out simple and solid. The build went smoothly and aside some spots in painting there weren't any hang ups with the kit. The only thing I wish I had on hand was a certain option set to add on to these kits. #Gundam #Gunpla #ガンプラ

The first Rouei is finished and I feel pretty good with the end results. I had a good time painting in the gray for the knee armor and back thrusters. I was surprised the suits grenade launcher wasn't included, but I was glad there's spare Hyakuren accessories. #Gunpla #ガンプラ

Imperial knights concepts

過去絵 オリメカっす

Started the first of the Rouei duo and I had some trial and error when it came to painting. More so getting the metallic yellow paint right in those tights spots in the chest and shoulders. #Gunpla #ガンプラ

"Alright, time for a demotion!" #Gunpla #ガンプラ

Finally finished the Graze Ritter and it's pretty good overall. Aside from fixing loose parts there weren't any major fixes to be made. Only other thing to do for this kit is properly paint the shoulders, head, and sword since stickers could do so much. #Gundam #Gunpla #ガンプラ